如何迁移Linux服务器第1部分-系统准备
介绍
There are many scenarios in which you might have to move your data and operating requirements from one server to another. 您可能需要在新的数据中心实施您的解决方案，升级到更大的机器，或者过渡到新硬件或新的 VPS 提供商。
Whatever your reasons, there are many different considerations you should make when migrating from one system to another. Getting functionally equivalent configurations can be difficult if you are not working with a configuration management solution such as Chef, Puppet, or Ansible. 您不仅需要传输数据，还需要配置您的服务以在新机器上以相同的方式运行。
Note: As a general note, modern deployments should always make use of a configuration management system wherever possible, whether they are designed to be transient Kubernetes nodes or they are running a combination of system services and containerized software. This guide will be primarily useful when this is not the case, and services need to be cataloged and migrated manually.
In this guide, you will review how to prepare your source and target systems for a migration. This will include getting your two machines to communicate with SSH keys, and an investigation into which components need to be transferred. You will begin the actual migration in the next article in this series.
Step 1 – Make Backups
The first step to take when performing any potentially destructive action is to create fresh backups. 您不希望在替换启动并运行之前命令破坏当前生产机器上的某些东西的情况。
There are a number of different ways to back up your server. 您的选择将取决于哪些选项对您的场景有意义以及您最熟悉的选项。
If you have access to the physical hardware and a space to backup (disk drive, USB, etc), you can clone the disk using any one of the many image backup solutions available. A functional equivalent when dealing with cloud servers is to take a snapshot or image from within the control panel interface.
Once you have completed backups, you are ready to continue. For the remainder of this guide, you will need to run many of the commands as root, or by using sudo.
Step 2 – Gather Information about the Source System
Before you begin a migration, you should configure your target system to match your source system.
You will want to match as much as you can between the current server and the one you plan on migrating to. You may want to upgrade your current server before migrating to a newer target system, and making another set of backups afterward. The important thing is that they match as closely as possible when starting the actual migration.
Most of the information that will help you decide which server system to create for the new machine can be retrieved with the uname command:
uname -r
Output5.4.0-26-generic
This is the version of the kernel that your current system is running. In order to make things go smoothly, it’s a good idea to try to match that on the target system.
You should also try to match the distribution and version of your source server. 如果您不知道您在源计算机上安装的发行版的版本，您可以通过键入以下内容来查找：
cat /etc/issue
OutputUbuntu 20.04.3 LTS \n \l
You should create your new server with these same parameters if possible. In this case, you would create a Ubuntu 20.04 system. You should also try to match the kernel version as closely as possible. Usually, this should be the most up-to-date kernel available from your Linux distro’s repositories.
Step 3 – Set Up SSH Key Access between Source and Target Servers
You’ll need your servers to be able to communicate so that they can transfer files. In order to do this, you should exchange SSH keys between them. You can learn how to configure SSH keys on a Linux server.
You’ll need to create a new key on your target server so that you can add that to your existing server’s authorized_keys file. This is cleaner than the other way around, because this way, the new server will not have a stray key in its authorized_keys file when the migration is complete.
First, on your destination machine, check that your root user doesn’t already have an SSH key by typing:
ls ~/.ssh
Outputauthorized_keys
如果您看到名为 id_rsa.pub 和 id_rsa 的文件，那么您已经有了密钥，您只需要传输它们。
If you don’t see those files, create a new key pair using ssh-keygen:
ssh-keygen -t rsa
在所有提示中按“Enter”以接受默认值。
Now, you can transfer the key to the source server by piping it through ssh:
cat ~/.ssh/id_rsa.pub | ssh other_server_ip "cat >> ~/.ssh/authorized_keys"
You should now be able to SSH freely to your source server from the target system without providing a password:
ssh other_server_ip
This will make any further migration steps go much more smoothly.
Step 4 – Create a List of Requirements
Now you’ll actually be doing some in-depth analysis of your system.
During the course of operations, your software requirements can change. 有时旧服务器有一些服务和软件在某一时刻需要，但已被替换。
In general, unneeded services can be disabled and, if completely unnecessary, uninstalled, but taking stock of them can be time-consuming. You’ll need to discover what services are being used on your source server, and then decide if those services should exist on your new server.
The way that you discover services and runlevels depends on the type of “init” system that your server employs. The init system is responsible for starting and stopping services, either at the user’s command or automatically. From about 2014 onward, almost all major Linux distributions adopted an init system called Systemd, and this guide will reflect Systemd.
In order to list that services that are registered with Systemd, you can use the systemctl command:
systemctl list-units -t service
Output UNIT LOAD ACTIVE SUB DESCRIPTION > accounts-daemon.service loaded active running Accounts Service > apparmor.service loaded active exited Load AppArmor profiles > apport.service loaded active exited LSB: automatic crash repor> atd.service loaded active running Deferred execution schedul> blk-availability.service loaded active exited Availability of block devi> cloud-config.service loaded active exited Apply the settings specifi> cloud-final.service loaded active exited Execute cloud user/final s> cloud-init-local.service loaded active exited Initial cloud-init job (pr> cloud-init.service loaded active exited Initial cloud-init job (me> console-setup.service loaded active exited Set console font and keyma> containerd.service loaded active running containerd container runti> …
For its service management, Systemd implements a concept of “targets”. While systems with traditional init systems could only be in one “runlevel” at a time, a server that uses Systemd can reach several targets concurrently. This is more flexible in practice, but figuring out what services are active can be more difficult.
您可以通过键入以下内容查看当前处于活动状态的目标：
systemctl list-units -t target
Output UNIT LOAD ACTIVE SUB DESCRIPTION basic.target loaded active active Basic System cloud-config.target loaded active active Cloud-config availability cloud-init.target loaded active active Cloud-init target cryptsetup.target loaded active active Local Encrypted Volumes getty.target loaded active active Login Prompts graphical.target loaded active active Graphical Interface local-fs-pre.target loaded active active Local File Systems (Pre) local-fs.target loaded active active Local File Systems multi-user.target loaded active active Multi-User System network-online.target loaded active active Network is Online …
您可以通过键入以下内容列出所有可用目标：
systemctl list-unit-files -t target
OutputUNIT FILE STATE VENDOR PRESET basic.target static enabled blockdev@.target static enabled bluetooth.target static enabled boot-complete.target static enabled cloud-config.target static enabled cloud-init.target enabled-runtime enabled cryptsetup-pre.target static disabled cryptsetup.target static enabled ctrl-alt-del.target disabled enabled …
From here, you can find out which services are associated with each target. Targets can have services or other targets as dependencies, so you can see which policies each target implements by typing:
systemctl list-dependencies target_name.target
multi-user.target is a commonly used target on Systemd servers that is reached at the point in the startup process when users are able to log in. 例如，您可以键入如下内容：
systemctl list-dependencies multi-user.target
Outputmulti-user.target ● ├─apport.service ● ├─atd.service ● ├─console-setup.service ● ├─containerd.service ● ├─cron.service ● ├─dbus.service ● ├─dmesg.service ● ├─docker.service ● ├─grub-common.service ● ├─grub-initrd-fallback.service …
This will list the dependency tree of that target, giving you a list of services and other targets that are started when that target is reached.
Checking Services Through Other Methods
While most services configured by your package manager will be registered with the init system, some other software, such as Docker deployments, may not be.
You can try to find these other services and processes by looking at the network ports and Unix sockets being used by these services. In most cases, services communicate with each other or outside entities in some way. There are only a certain number of server interfaces on which services can communicate, and checking those interfaces is a good way to spot other services.
One tool that you can use to discover network ports and in-use Unix sockets is netstat. You can run netstat with the -nlp flags in order to get an overview:
netstat -nlp
-nspecifies that numerical IP addresses should be shown in the output, rather than hostnames or usernames. When checking a local server, this is usually more informative.-lspecifies thatnetstatshould only display actively listening sockets.-pdisplays the process ID (PID) and the name of each process using the port or socket.
OutputActive Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:8200 0.0.0.0:* LISTEN 104207/vault tcp 0 0 0.0.0.0:1935 0.0.0.0:* LISTEN 3691671/nginx: mast tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 3691671/nginx: mast tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 3691671/nginx: mast tcp 0 0 0.0.0.0:1936 0.0.0.0:* LISTEN 197885/stunnel4 tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 162540/systemd-reso tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 129518/sshd: /usr/s tcp 0 0 127.0.0.1:3000 0.0.0.0:* LISTEN 99465/node /root/he tcp 0 0 0.0.0.0:8088 0.0.0.0:* LISTEN 3691671/nginx: mast tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 3691671/nginx: mast tcp 0 0 0.0.0.0:56733 0.0.0.0:* LISTEN 170269/docker-proxy tcp6 0 0 :::80 :::* LISTEN 3691671/nginx: mast tcp6 0 0 :::22 :::* LISTEN 129518/sshd: /usr/s tcp6 0 0 :::443 :::* LISTEN 3691671/nginx: mast tcp6 0 0 :::56733 :::* LISTEN 170275/docker-proxy udp 0 0 127.0.0.53:53 0.0.0.0:* 162540/systemd-reso raw6 0 0 :::58 :::* 7 162524/systemd-netw raw6 0 0 :::58 :::* 7 162524/systemd-netw Active UNIX domain sockets (only servers) Proto RefCnt Flags Type State I-Node PID/Program name Path unix 2 [ ACC ] STREAM LISTENING 5313074 1/systemd /run/systemd/userdb/io.systemd.DynamicUser unix 2 [ ACC ] SEQPACKET LISTENING 12985 1/systemd /run/udev/control unix 2 [ ACC ] STREAM LISTENING 12967 1/systemd /run/lvm/lvmpolld.socket unix 2 [ ACC ] STREAM LISTENING 12980 1/systemd /run/systemd/journal/stdout unix 2 [ ACC ] STREAM LISTENING 16037236 95187/systemd /run/user/0/systemd/private …
netstat output contains two separate blocks — one for network ports, and one for sockets. If you see services here that you do not have information about through the init system, you’ll have to figure out why that is and whether you intend to migrate those services as well.
You can get similar information about the ports that services are making available by using the lsof command:
lsof
OutputCOMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME node\x20/ 99465 root 20u IPv4 16046039 0t0 TCP 127.0.0.1:3000 (LISTEN) vault 104207 vault 8u IPv4 1134285 0t0 TCP *:8200 (LISTEN) sshd 129518 root 3u IPv4 1397496 0t0 TCP *:22 (LISTEN) sshd 129518 root 4u IPv6 1397507 0t0 TCP *:22 (LISTEN) systemd-r 162540 systemd-resolve 12u IPv4 5313507 0t0 UDP 127.0.0.53:53 systemd-r 162540 systemd-resolve 13u IPv4 5313508 0t0 TCP 127.0.0.53:53 (LISTEN) docker-pr 170269 root 4u IPv4 1700561 0t0 TCP *:56733 (LISTEN) docker-pr 170275 root 4u IPv6 1700573 0t0 TCP *:56733 (LISTEN) stunnel4 197885 stunnel4 9u IPv4 1917328 0t0 TCP *:1936 (LISTEN) sshd 3469804 root 4u IPv4 22246413 0t0 TCP 159.203.102.125:22->154.5.29.188:36756 (ESTABLISHED) nginx 3691671 root 7u IPv4 2579911 0t0 TCP *:8080 (LISTEN) nginx 3691671 root 8u IPv4 1921506 0t0 TCP *:80 (LISTEN) nginx 3691671 root 9u IPv6 1921507 0t0 TCP *:80 (LISTEN) nginx 3691671 root 10u IPv6 1921508 0t0 TCP *:443 (LISTEN) nginx 3691671 root 11u IPv4 1921509 0t0 TCP *:443 (LISTEN) nginx 3691671 root 12u IPv4 2579912 0t0 TCP *:8088 (LISTEN) nginx 3691671 root 13u IPv4 2579913 0t0 TCP *:1935 (LISTEN) nginx 3691674 www-data 7u IPv4 2579911 0t0 TCP *:8080 (LISTEN) nginx 3691674 www-data 8u IPv4 1921506 0t0 TCP *:80 (LISTEN) nginx 3691674 www-data 9u IPv6 1921507 0t0 TCP *:80 (LISTEN) nginx 3691674 www-data 10u IPv6 1921508 0t0 TCP *:443 (LISTEN) nginx 3691674 www-data 11u IPv4 1921509 0t0 TCP *:443 (LISTEN) nginx 3691674 www-data 12u IPv4 2579912 0t0 TCP *:8088 (LISTEN) nginx 3691674 www-data 13u IPv4 2579913 0t0 TCP *:1935 (LISTEN)
Both netstat and lsof are core Linux process management tools that are useful in a variety of other contexts.
Step 5 – Gathering Package Versions
At this point, you should have a good idea about what services are running on your source machine that you should be implementing on your target server.
You should have a list of services that you know you will need to implement. For the transition to go smoothly, it is important to attempt to match versions wherever possible.
You shouldn’t necessarily try to review every single package installed on the source system and attempt to replicate it on the new system, but you should check the software components that are important for your needs and try to find their version number.
You can try to get version numbers from the software itself, sometimes by passing -v or --version flags to each command, but this is more straightforward to do through your package manager. If you are on an Ubuntu/Debian based system, you can see which version of a package is installed using the dpkg command:
dpkg -l | grep package_name
If you are instead on a Rocky Linux, RHEL, or Fedora-based system, you can use rpm for the same purpose:
rpm -qa | grep package_name
This will give you a good idea of the package version that you want to match. Make sure to retain the version numbers of any relevant software.
Conclusion
You should now have a good idea of what processes and services on your source server need to be transferred over to your new machine. You should also have the preliminary steps completed to allow your two servers to communicate with each other.
迁移的基础工作现已完成。 In the next article in this series, you will begin the actual migration process.
